CROSS BONES MODS

THE ONE INCH AREA,STOCK RISERS


THE PICTURE ABOVE SHOWS A HANDLEBAR THAT REQUIRES A DOUBLE SIDED RECESS FOR THE 1-1/4'' STEP UP. TYPICALLY THE KNURLED 1'' AREA IS 2'' LONG AND SINCE THE "B" TYPE RISERS ARE WIDER THAN STOCK, THE RISER WILL OVERLAP AND CONCEAL THE 1'' AREA ENTIRELY. SEE PIC BELLOW.


FINISHED LOOK


SHOWN BELLOW,3'' SET,ACCOMMODATING 1-1/4'' HANDLEBAR WITH 1'' RISERS AREA. THE HANDLEBAR IN BETWEEN  THE RISERS IS 1-1/4''.THE RISERS COVER COMPLETELY THE 1'' BAR DIAMETER AND SLIGHTLY OVERLAP THE 1-1/4''. TYPICAL BARS ARE CARLINI AND BURLEIGH BARS,BUT THIS STYLE HAS LATELY BECOME INDUSTRY'S STANDARD.




THE SET BELLOW FEATURES 1-1/4'' RECESS,STEPPED DOWN TO 1'' TUBE BETWEEN THE RISERS. THESE RISERS WERE SPECIALLY  MADE ON CUSTOMERS REQUEST. IF YOU HAVE ANY FITMENT DOUBTS,PLEASE CONTACT US  ,WE CAN MAKE ANYTHING WORK.



See blueprints bellow.

The upper diameter of the riser is 2.100'', bottom is 1.500''.

"C" dimension bellow on most brand name bars is 2''.

This is the reason why you will need double sided recess.

If you are in doubt, send us the dimensions bellow and we will blueprint your set.

The double sided recess also conceals the one inch area "C", making your bars look like 1-1/4'' all the way through.

DOUBLE SIDED SCHEMATIC
ONE SIDED SCHEMATIC